TCN75 Data Sheet
http://www.microchip.com/stellent/images/mchpsiteimages/dwnfolder.gifTCN75 Data SheetTCN75 is a serially programmable temperature sensor that notifies the host controller when ambient temperature exceeds a user-programmed setpoint. Hysteresis is also programmable. The INT/CMPTR output is programmable as either a simple comparator for thermostat operation or as a temperature event interrupt. Communication with the TCN75 is accomplished via a two-wire bus that is compatible with industry standard protocols. This permits reading the current temperature, programming the setpoint and hysteresis and configuring the device. The TCN75 powers up in Comparator mode with a default setpoint of 80°C with 5°C hysteresis. Defaults allow independent operation as a stand-alone thermostat. A shut-down command may be sent via the 2-wire bus to activate the low-power standby mode. Address selection inputs allow up to eight TCN75's to share the same 2-wire bus for multi-zone monitoring. All registers can be read by the host and the INT/CMPTR output's polarity is user programmable. Both polled and interrupt driven systems are easily accommodated. Small physical size, low installed cost and ease of use make the TCN75 an ideal choice for implementing sophisticated system management schemes.
Parameter NameValue
Typical Accuracy (°)0.5
Max Input/ Supply Current (µA)1000
Max. Accuracy @ 25° (°)3
Temp. Range (°C)-55 to +125
Operating Voltage Range (V)+2.7 to +5.5
Device DescriptionSerial Output Temp Sensor
Features
Solid State Temperature Sensing; 0.5°C Accuracy (Typ.)
Operates from -55°C to +125°C
Voltage Operating Range: 2.7V to 5.5V
Programmable Trip Point and Hysteresis with Power-up Defaults
Standard 2-Wire Serial Interface
Thermal Event Alarm Output Functions as Interrupt or Comparator/Thermostat Output
Up to 8 TCN75's may share the same bus
Shutdown Mode for Low Standby Power Consumption
5V Tolerant I/O at VDD = 3V
Low Power: 250 µA (Typ.) Operating,1 µA (Typ.) Shutdown Mode
推荐MICROCHIP全系列产品推广商：（可申请部分免费样片，资料，大家赶快行动吧！）
授权A级代理商;提供技术支持;提供成熟方案;提供免费样品;提供详细资料！
深圳市英锐恩科技有限公司
联系电话: 0755-88845951 82543411传真：0755-82543511
E-mail: enroo@enroo.com
网址: www.enroo.com （”o”为字母）
公司地址: 福田区深南中路嘉汇新城汇商中心1203-1205
专业为客户提供芯片选型指导、技术咨询、开发工具技术支持、产品开发设计等专业的技术服务。
同时为Microchip全系列芯片代理推广商,分销服务商,专业提供Microchip全系列开发工具及技术支持。
页:
[1]