The TC1107 is a fixed output, high accuracy (typically ±0.5%) CMOS upgrade for older (bipolar) low dropout regulators. Total supply current is typically 50µA at full load (20 to 60 times lower than in bipolar regulators). TC1107 key features include ultra low noise operation (plus optional Bypass input); very low dropout voltage (typically 240 mV at full load), and fast response to step changes in load. Supply current is reduced to 0.05 µA (typical) and VOUT falls to zero when the shutdown input is low. The TC1107 incorporates both over-temperature and over-current protection. The TC1107 is stable with an output capacitor of only 1µF and has a maximum output current of 300 mA.
Parameter Name Value
Max Input Voltage 6
Output Voltage (v) 2.5, 2.8, 3.0, 3.3, 5.0
Typical Active Current (µA) 50
Typical Dropout Voltage @ Max. lout (mV) 240
Typical Output Voltage Accuracy (%) 0.5
Output Capacitor Type Aluminum/Tantalum
Output Current (mA) 300
Features
Extremely Low Supply Current (50 µA typical)
Very Low Dropout Voltage
Minimum 300 mA Output Current
High Output Voltage Accuracy
Standard or Custom Output Voltages
Power-Saving Shutdown Mode
Bypass Input for Ultra-Quiet Operation
Over-Current and Over-Temperature Protection
