标题: TC4426/27/28 Data Sheet [打印本页] 作者: admin 时间: 2010-4-17 15:48 标题: TC4426/27/28 Data Sheet TC4426/27/28 Data Sheet
The TC4426/4427/4428 are improved versions of the earlier TC426/427/428 family of buffer/drivers (with which they are pin compatible). They will not latch up under any conditions within their power and voltage ratings. They are not subject to damage when up to 5V of noise spiking (of either polarity) occurs on the ground pin. They can accept, without damage or logic upset, up to 500 mA of reverse current (of either polarity) being forced back into their outputs. All terminals are fully protected against up to 4kV of electrostatic discharge. As MOSFET drivers, the TC4426/4427/4428 can easily switch 1000pF gate capacitances in under 30nsec, and provide low enough impedances in both the ON and OFF states to ensure the MOSFET's intended state will not be affected, even by large transients. Other compatible drivers are the TC4426A/27A/28A. These drivers have matched input to output leading edge and falling edge delays, tD1 and tD2, for processing short duration pulses in the 25 nsec range. They are pin compatible with the TC4426/27/28.
Parameter Name Value
Power Dual
Peak Output Current (mA) 1500
Output Resistance (RH/RL)(Max. @ 25°C) 10/10
Max. Supply Voltage (V) 18
Input/Output Delay (td1, td2)1 (ns) 20/40
Configuration Inverting
Description Low-Side MOSFET Drivers, 1.5A Peak Output Current
Operating Temp. Range (°C) -40 to 125
Features
- Wide Operating Range: 4.5V to 18V
- High Capacitive Load Drive Capability: 1000pF in 25nsec
- Short Delay Times: <40nsec Typ.
- Consistent Delay Times With Changes in Supply Voltage
- Low Supply Current
With Logic ""1"Input...............4mA
With Logic ""0"Input...............400
µA
- Low Output Impedance: 7Ω Typ.
- Latch-Up Protected: Will Withstand >0.5A Reverse Current, Down to
– 5V
- Input Will Withstand Negative Inputs
- ESD Protected: 4kV
- Pinouts Same as TC426/27/28
