The TC1413/1413N are 3A CMOS buffer/drivers. They will not latch up under any conditions within their power and voltage ratings. They are not subject to damage when up to 5V of noise spiking of either polarity that occurs on the ground pin. They can accept, without damage or logic upset, up to 500mA of current of either polarity being forced back into their output. All terminals are fully protected against up to 4 kV of electrostatic discharge. As MOSFET drivers, the TC1413/1413N can easily switch 1800pF gate capacitance in 20nsec with matched rise and fall times, and provide low enough impedance in both the ON and the OFF states to ensure the MOSFET’s intended state will not be affected, even by large transients. The rise and fall time edges are matched to allow driving short-duration inputs with greater output accuracy.
Parameter Name Value
Power Single
Peak Output Current (mA) 3000
Output Resistance (RH/RL)(Max. @ 25°C) 4/4
Max. Supply Voltage (V) 16
Input/Output Delay (td1, td2)1 (ns) 45/45
Configuration Inverting
Description Low-Side MOSFET Drivers, 2.0A to 9.0A Peak Output Current
Operating Temp. Range (°C) -40 to 85
Features
- Latch-Up Protected: Will Withstand 500mA Reverse Current
- Input Will Withstand Negative Inputs Up to 5V
- ESD Protected: 4kV
- Wide Operating Range: 4.5V to 16V
- High Capacitive Load Drive Capability: 1800pF in 20nsec
- Short Delay Time: 35nsec Typ
- Consistent Delay Times With Changes in Supply Voltage
- Matched Delay Times
- Low Supply Current
With Logic “1‿ Input ............... 500µA
With Logic “0‿ Input ............... 100µA
- Low Output Impedance: 2.7Ω
- Pinout Same as TC1410/11/12