标题: TC913A/913B Data Sheet [打印本页] 作者: admin 时间: 2010-4-17 16:47 标题: TC913A/913B Data Sheet TC913A/913B Data Sheet
TC913A is a monolithic, auto-zeroed operational amplifier. Elimination of the external capacitors allows the designer to increase reliability, lower cost and simplify design by lowering parts count. Since the TC913 is an auto-zeroing op amp, input offset voltage is very low. More important, there is almost zero drift. with time. This eliminates production line adjustments, as well as periodic calibration. Notable electrical characteristics are low supply current (650 µA,typical), single-supply operation (6.5V to 16V), low input offset voltage (15 µV,typical), low noise (<11 µVP-P, typical, for a 10Hz bandwidth), and fast recovery from saturation without the use of external clamp circuitry. This device is supplied in 8-pin plastic DIP and plastic SOIC packages. It is pin compatible with bipolar, CMOS, JFET and other chopper-stabilized op-amps using the industry-standard 741 pinout.
Parameter Name Value
Temp. Range (°C) 0°C to +70°C
Vos Max (µV) 15
# per Package 2
Iq Typical (µA) 650
Iq Max (µA) 425
GBWP (kHz) 1500
Operating Voltage Range (V) 7.0 to 16
Device Description Linear High Precision Op Amps-Auto Zero
PSRR Min (dB) 110
CMRR Min (dB) 110
Vos/Ta (uV/°C) 0.05
Ib (pA) 90
Aol (dB) 120
PM (deg) 45
Unity Gain Stable Yes
Slew Rate V/uS 2.5
Features
Operating Voltage 7.0V to 16V
Single and Split Supply
