标题: MCP3426/7/8 Data Sheet [打印本页] 作者: admin 时间: 2010-4-17 17:23 标题: MCP3426/7/8 Data Sheet MCP3426/7/8 Data Sheet
The MCP3426 is a two channel low-noise, high accuracy delta-sigma A/D converter with differential inputs and up to 16 bits of resolution. The on-board precision 2.048V reference voltage enables an input range of ±2.048V differentially. The device uses a two-wire I2C™ compatible serial interface and operates from a single power supply ranging from 2.7V to 5.5V. The MCP3426 device performs conversions at rates of 15, 60 or 240 samples per second depending on user controllable configuration bit settings using the two-wire I2C™Compatible Compatible compatible serial interface. This device has an onboard programmable gain amplifier (PGA). User can select the PGA gain of x1, x2, x4, or x8 before the analog-to-digital conversion takes place. This allows the MCP3426 device to convert a smaller input signal with high resolution. The device has two conversion modes: (a) Continuous mode and (b) One-Shot mode. In One-Shot mode, the device enters a low current standby mode automatically after one conversion. This reduces current consumption greatly during idle periods. The MCP3426 device can be used for various high accuracy analog-to-digital data conversion applications where ease of use, low power consumption and small footprint are major considerations.
Parameter Name Value
Typical Supply Current (µA) 145
Typical INL (ppm) 10
Max Sample Rate (samples/sec) 15
Input Type 2 Differential
Interface I²C™
Resolution (bits) 16
Supply Voltage Range (V) 2.7 to 5.5
Features
16-bit resolution
2-channel differential input operation
On-board voltage reference with 15 ppm/°C drift
On-board PGA, gains of 1, 2, 4, 8
Programmable data rate options
- 15 SPS (16 bits)
- 60 SPS (14 bits)
- 240 SPS (12 bits)
INL 10 ppm of FSR typ.
Low current consumption, 135 µA at 3V
One-shot or continuous conversion options
Supports I2C™ interface
Extended temperature range -40°C to +125°C
