The RE46C122 is low power CMOS ionization type smoke detector IC. With few external components this circuit will provide all the required features for an ionization type smoke detector. An internal oscillator strobes power to the smoke detection circuitry for 10.5mS every 1.66 seconds to keep standby current to a minimum. A check for a low battery condition is performed every 40 seconds when in standby. The temporal horn pattern supports the NFPA 72 emergency evacuation signal. An interconnect pin allows multiple detectors to be connected such that when one units alarms all units will sound. An internal 10 minute timer allows for a separate button to be used for reduced sensitivity mode. Although this device was designed for smoke detection utilizing an ionization chamber it could be used in a variety of security applications. The RE46C122 was designed for use in smoke detectors that comply with Und
Parameter Name Value
Type Ionization
Horn Driver Alarm Pattern NFPA Temporal
Low Battery Detect True
Reverse Battery Protection True
Alarm Interconnect True
Sensitivty Timer True
Powerup Low Battery True
Operating Temperature Range (C) -10C to 60C
Features
>1500V ESD Protection (HBM) on all Pins
Guard Outputs for Ion Detector Input
+/-0.75pA Detect Input Current
Internal Reverse Battery Protection
Low Quiescent Current Consumption (<6.5uA)
Available in 16L PDIP or 16L N SOIC
Internal Low Battery Detection
Power Up Low Battery Test
Interconnect up to 40 Detectors
10 Minute Timer for Sensitivity Control
Compatible with Allegro A5367
Available in Standard Packaging or RoHS Compliant Pb Free Packaging.
