The HCS360 is a code hopping encoder designed for secure Remote Keyless Entry (RKE) systems. The HCS360 utilizes Microchip’s patented KEELOQ® hopping technology, which incorporates high security, a small package outline, and low cost, to make this device a perfect solution for unidirectional remote keyless entry systems and access control systems. The HCS360 combines a 32-bit hopping code generated by a non-linear encryption algorithm, with a 28/32-bit serial number and 7/3 status bits to create a 67-bit transmission stream. The length of the transmission eliminates the threat of code scanning and the code hopping mechanism makes each transmission unique, thus rendering code capture and re-send (code grabbing) schemes useless. The encoder key, serial number, and configuration data are stored in EEPROM, which is not accessible via any external connection. This makes the HCS360 a very secure unit. The HCS360 provides an easy-to-use serial interface for programming the necessary security keys, system parameters, and configuration data. The HCS360 operates over a wide voltage range of 2.0V to 6.6V and has four button inputs in an 8-pin configuration. This allows the system designer the freedom to utilize up to 15 functions. Additional features include an IR Mode, PWM and Manchester Encoding, 2 independent counters and 2-bit CRC.
参数名称 数值
Protocols 11
Transmission Code Length Bits 67
Other Features 2 independent counters
Seed Length 48
Code Hoppings Bits 32
Operating Voltage (V) 2.0 to 6.3
Tunable OSC No
Function Codes 15
CRC Yes
