英锐恩单片机论坛,Microchip单片机,模拟器件,接口电路,麦肯单片机,单片机应用交流

标题: Proteus仿真问题 [打印本页]

作者: eva 时间: 2012-8-21 11:54
标题: Proteus仿真问题
用Proteus仿真是出现下面错误，请高手给看一下是什么意思啊？要如何修正呢？
Program of EEPROM data has invalid address [0FFF] for this device
Real Time Simulation failed to start
我用的芯片是PIC12F629 程序如下：
#include "P12F629.INC"
#include "P12F675.INC"
__CONFIG 0x0184
bcf STATUS,RP0 ;Bank 0
clrf GPIO             ;Init GPIO
movlw 07h          ;Set GP<2:0> to
movwf CMCON    ;digital IO
bsf STATUS,RP0 ;Bank 1
clrf ANSEL          ;Digital I/O
movlw 08h          ;Set GP<3:2> as inputs
movwf TRISIO    ;and set GP<5:4,1:0>
                        ;as outputs
movlw 07h
movwf OPTION_REG
bcf STATUS,RP0
LOOP
  bcf GPIO,GP2
  call DELAY
  bsf GPIO,GP2
  call DELAY
  goto LOOP
DELAY
  bcf INTCON,T0IF
  clrf TMR0
  btfss INTCON,T0IF
  goto $-1
  return
END

欢迎光临英锐恩单片机论坛,Microchip单片机,模拟器件,接口电路,麦肯单片机,单片机应用交流 (http://enroobbs.com/)