原装ICD2,Explorer 16演示板,程序是从microchip下载的DEMO,芯片使用PIC24FJ010时一切正常,使用PIC24FJ256gb110时出现如下提示:
Auto-connect not enabled - Not connecting (Try enabling auto-connect on the ICD2 settings pages.)
Connecting to MPLAB ICD 2
...Connected
Setting Vdd source to target
Target Device PIC24FJ256GB110 found, revision = Rev 0x0
...Reading ICD Product ID
Running ICD Self Test
...Passed
MPLAB ICD 2 Ready
Resetting Target
MPLAB ICD 2 Ready
Programming Target...
...Validating configuration fields
...Erasing Part
...Programming Program Memory (0x0 - 0x197F)
Verifying...
...Program Memory
ICD0161: Verify failed (MemType = Program, Address = 0x2, Expected Val = 0x0, Val Read = 0x1978)
ICD0275: Programming failed.
MPLAB ICD 2 Ready
|
|