英锐恩单片机论坛,Microchip单片机,模拟器件,接口电路,麦肯单片机,单片机应用交流

 找回密码
 立即注册
搜索
电子烟方案单片机单片机开发深圳单片机开发
单片机方案国产单片机8位单片机电子烟方案开发
查看: 4025|回复: 0
打印 上一主题 下一主题

pic18F252与pic18F2520的区别

[复制链接]
跳转到指定楼层
1#
发表于 2009-4-27 14:40:55 | 只看该作者 回帖奖励 |倒序浏览 |阅读模式
在HITECH-PICC18编译下,我发现了PIC18F252与pic18F2520有很大的不同
第一IC18F252最多只能用50%,那怕是50.001%的超过,编程器都不会出问题,但是PIC18F2520则不受限制!到80%还是正常工作。
但是我还是发现了PIC18F252在液晶显示上的优点。
具体说吧。
#include <pic18.h>
typedef unsigned char uchar;
typedef unsigned int uint;
typedef unsigned long ulong;

const uchar tag[] = {
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//1
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//2
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x00,0x00,0x00,0x00,0x00,0x00,//3
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x7C,0x00,0x00,0x00,0x00,0x00,0x00,//4
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,//5
0x03,0xFF,0xFF,0xFF,0xFE,0x00,0x00,0xFF,0xFF,0xE0,0x00,0x01,0xFF,0xFF,0xE0,0x00,//6
0x03,0xFF,0xFF,0xFF,0xFE,0x00,0x1F,0xFE,0x01,0xF8,0x00,0x3F,0xFF,0xFF,0xFC,0x00,//7
0x00,0x00,0x1F,0xC0,0x00,0x00,0x7F,0xC0,0x03,0x7F,0x00,0xFF,0x00,0x01,0xFF,0x00,//8
0x00,0x00,0x1F,0xC0,0x00,0x01,0xFF,0x00,0x06,0x7F,0x80,0xFE,0x00,0x00,0x7F,0x00,//9
0x00,0x00,0x1F,0xC0,0x00,0x03,0xFE,0x00,0x00,0x6F,0x80,0x3F,0xC0,0x00,0x00,0x00,//10
0x00,0x00,0x1F,0xC0,0x00,0x03,0xFC,0x00,0x00,0x00,0x00,0x0F,0xFF,0xF8,0x00,0x00,//11
0x00,0x00,0x1F,0xC0,0x00,0x03,0xFC,0x00,0x00,0x00,0x00,0x00,0x1F,0xFF,0xF0,0x00,//12
0x00,0x00,0x1F,0xC0,0x00,0x03,0xFC,0x00,0x00,0x3F,0x80,0x00,0x00,0x07,0xFE,0x00,//13
0x00,0x00,0x1F,0xC0,0x00,0x01,0xFE,0x00,0x00,0x3F,0x81,0xFE,0x00,0x00,0x7F,0x80,//14
0x00,0x00,0x1F,0xC0,0x00,0x01,0xFF,0x00,0x00,0x7F,0x01,0xFF,0x00,0x00,0x3F,0x80,//15
0x00,0x00,0x1F,0xC0,0x00,0x00,0xFF,0xC0,0x01,0xFE,0x00,0xFF,0x80,0x00,0xFF,0x00,//16
0x00,0x00,0x1F,0xC0,0x00,0x00,0x0F,0xFF,0xFF,0xF8,0x00,0x3F,0xFF,0xFF,0xF8,0x00,//17
0x00,0x00,0x1F,0xC0,0x00,0x00,0x00,0x1F,0xFF,0x00,0x00,0x00,0xFF,0xFF,0x00,0x00,//18
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//19
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//20
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//21
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//22
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//23
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//24
0x00,0x88,0x2A,0x22,0x27,0x00,0x20,0x0E,0x7D,0xF7,0xC0,0x11,0x17,0xC4,0x70,0x00,//25
0x01,0x48,0x2A,0x51,0x48,0x80,0x50,0x11,0x11,0x14,0x40,0x29,0x14,0x4A,0x48,0x00,//26
0x02,0x28,0x2A,0x88,0x8C,0x00,0x88,0x18,0x11,0x04,0x40,0x45,0x14,0x11,0x44,0x00,//27
0x03,0xE8,0x2A,0xF8,0x83,0x00,0xF8,0x06,0x11,0xC7,0xC0,0x7D,0xF7,0x1F,0x44,0x00,//28
0x02,0x28,0x94,0x88,0x88,0x80,0x88,0x11,0x11,0x14,0x00,0x45,0x14,0x51,0x48,0x00,//29
0x02,0x2F,0x94,0x88,0x87,0x00,0x88,0x0E,0x11,0xF4,0x00,0x45,0x17,0xD1,0x70,0x00,//30
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//31
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
};
#define ZWCS       RB3
#define ZWSTD      RB4
#define ZWSCLK     RB5
#define ZWPSB     RB6  
#define ZWRST     RB7
#define TRISZWRS    TRISB3
#define TRISZWRW    TRISB4  
#define TRISZWE    TRISB5  
#define TRISZWPSB    TRISB6  
#define TRISZWRST    TRISB7
#define comm  0
#define dat   1
#define x1    0x80
#define x2    0x90
#define y     0x80
void wr_lcd (uchar dat_comm,uchar content)
{
   uchar a,i,j;
delay_us(90);
// DelayUs(250);
   a=content;
ZWCS = 1;
ZWSCLK = 0;
ZWSTD = 1;
  for(i=0;i<5;i++)
{
  PULSE();
}
ZWSTD = 0;
PULSE();
   if(dat_comm)
{
  ZWSTD = 1;

}
   else
{
  ZWSTD = 0;
}
PULSE();
ZWSTD = 0;
PULSE();
   for(j=0;j<2;j++)
   {
     for(i=0;i<4;i++)
     {
        a=a<<1;
   ZWSTD = CARRY;
   PULSE();
     }
  ZWSTD = 0;
     for(i=0;i<4;i++)
     {
   PULSE();
  
     }
   }
delay_us(1);
ZWCS = 0;
}
void img_disp(const uchar *img)
{
  uchar i,j;
  for(j=0;j<32;j++)
  {
    for(i=0;i<8;i++)
    {
      wr_lcd (comm,0x34);
      wr_lcd (comm,y+j);
      wr_lcd (comm,x2+i);
      wr_lcd (comm,0x30);
      wr_lcd (dat,img[j*16+i*2]);
      wr_lcd (dat,img[j*16+i*2+1]);
    }
  }
  wr_lcd (comm,0x36);
}
void main()
{

}
您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

关闭

站长推荐上一条 /1 下一条

小黑屋|公司首页|Microchip单片机,模拟器件,接口电路,麦肯单片机,单片机应用交流 ( 粤ICP备09008620号 )

GMT+8, 2024-11-24 02:22 , Processed in 0.050162 second(s), 23 queries .

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回复 返回顶部 返回列表