TC648 Datasheet

admin

  TC648 Datasheet

The TC648 is a switch mode fan speed controller for use with brushless DC motors. Temperature proportional speed control is accomplished using pulse width modulation(PWM). A thermistor (or other voltage output temperature sensor) connected to the VIN input furnishes the required control voltage of 1.25V to 2.65V(typical) for 0% to 100% PWM duty cycle. The TC648 can be configured to operate in either Auto-Shutdown or Minimum Speed mode. In Auto-Shutdown mode,fan operation is automatically suspended when measured temperature (VIN) is lower than a user-programmed minimum setting (VAS). The fan is automatically restarted and proportional speed control restored when VIN exceeds VAS (plus hysteresis). Operation in Minimum Speed mode is similar to Auto-Shutdown mode, except the fan is operated at a user-programmed minimum setting when measured temperature is low. An integrated Start-Up Timer ensures reliable motor start-up at turn-on, or when coming out of Shutdown mode. The over-temperature fault (OTF) is asserted when the PWM reaches 100% duty cycle, indicating a possible thermal runaway situation. The TC648 is packaged in a space-saving 8-pin plastic DIP, MSOP or SOIC package and is available in the industrial temperature range.

Parameter Name  Value
Typical Accuracy (°C)  Depends on external thermistor
Over Temp Alert  yes
SM Bus  NO
Predictive Fan Fault  NO
Max. Supply Current (µA)  1000
Max. Accuracy @ 25°C (°C)  Depends on external thermistor
Integrated Temp Sensor  No
Fan Sense  No
External Temp Input  Yes
Auto Shutdown  Yes
Device Description  Fan Manager
Temp Range (°C)  -40 to +85
Vcc Range (V)  +3.0 to +5.5

     Features
Temperature Proportional
Fan Speed for Acoustic Control and Longer Fan Life
Efficient PWM Fan Drive
3.0V to 5.5V Supply Range  Fan Voltage Independent of TC648 Supply Voltage - Supports Any Fan Voltage!
Over-Temperature Fault Detection
Automatic Shutdown Mode for "Green" Systems
Supports Low Cost NTC/PTC Thermistors


推荐MICROCHIP全系列产品推广商：（可申请部分免费样片，资料，大家赶快行动吧！）
授权A级代理商;提供技术支持;提供成熟方案;提供免费样品;提供详细资料！
深圳市英锐恩科技有限公司
联系电话: 0755-88845951 82543411传真：0755-82543511
E-mail: enroo@enroo.com
网址: www.enroo.com （”o”为字母）
公司地址: 福田区深南中路嘉汇新城汇商中心1203-1205
专业为客户提供芯片选型指导、技术咨询、开发工具技术支持、产品开发设计等专业的技术服务。
同时为Microchip全系列芯片代理推广商,分销服务商,专业提供Microchip全系列开发工具及技术支持。