英锐恩单片机论坛,Microchip单片机,模拟器件,接口电路,麦肯单片机,单片机应用交流

 找回密码
 立即注册
搜索
电子烟方案单片机单片机开发深圳单片机开发
单片机方案国产单片机8位单片机电子烟方案开发
查看: 2449|回复: 0
打印 上一主题 下一主题

MCP434X/436X Data Sheet

[复制链接]
跳转到指定楼层
1#
发表于 2010-4-17 17:55:21 | 只看该作者 回帖奖励 |正序浏览 |阅读模式
  MCP434X/436X Quad Non-Volatile Data Sheet


The MCP436X devices are non-volatile, 6-bit (257 wiper steps) digital potentiometers that are programmed/reprogrammed through an SPI compatible interface. The MCP436X devices offer a variety of configurations simplifying design while minimizing cost, package size and pin count. These devices offer WiperLock™ Technology which allows the user unlimited reprogramming and locking of the wiper setting. This is useful for equipment that requires factory trimming or recalibration. The MCP434X family of devices are available with resistor values of 5KΩ, 10KΩ, 50k and 100KΩ.

Parameter Name  Value
Temp. Range (°C)  -40 to +125
Volatile / Non Volatile  Nonvolatile
Number of Taps  257
Resistance (ohms) K  5, 10, 50, 100
# per Package  4
INL (Max)  1
DNL (Max)  0.5
Interface  SPI

     Features
Quad Resistor Network
Potentiometer or Rheostat configuration options
Resistor Network Resolution
- 7-bit: 128 Resistors (129 Steps)
- 8-bit: 256 Resistors (257 Steps)
RAB Resistances options of:
- 5k
- 10k
- 50k
- 100 k
Zero-Scale to Full-Scale Wiper operation
Low Wiper Resistance: 75  (typical)
Low Tempco:
- Absolute (Rheostat): 50 ppm typical
(0°C to 70°C)
- Ratiometric (Potentiometer): 15 ppm typical
Non-volatile Memory
- Automatic Recall of Saved Wiper Setting
- WiperLock™ Technology
SPI serial interface (10 MHz, modes 0,0 & 1,1)
- High-Speed Read/Writes to wiper registers
- Read/Write to Data EEPROM registers
- Serially enabled EEPROM write protect
Resistor Network Terminal Disconnect Feature
via Terminal Control (TCON) Register
Reset input pin
Write Protect Feature:
- Hardware Write Protect (WP) Control pin
- Software Write Protect (WP) Configuration bit
Brown-out reset protection (1.5V typical)
Serial Interface Inactive current (2.5 uA typical)
High-Voltage Tolerant Digital Inputs: Up to 12.5V
Supports Split Rail Applications
Internal weak pull-up on all digital inputs
Wide Operating Voltage:
- 2.7V to 5.5V - Device Characteristics
Specified
- 1.8V to 5.5V - Device Operation
Wide Bandwidth (-3 dB) Operation:
- 2 MHz (typical) for 5.0 k device
Extended temperature range (-40°C to +125°C)



推荐MICROCHIP全系列产品推广商:(可申请部分免费样片,资料,大家赶快行动吧!)
授权A级代理商;提供技术支持;提供成熟方案;提供免费样品;提供详细资料!
深圳市英锐恩科技有限公司
联系电话: 0755-88845951 82543411传真:0755-82543511
E-mail: enroo@enroo.com
网址: www.enroo.com (”o”为字母)
公司地址: 福田区深南中路嘉汇新城汇商中心1203-1205
专业为客户提供芯片选型指导、技术咨询、开发工具技术支持、产品开发设计等专业的技术服务。
同时为Microchip全系列芯片代理推广商,分销服务商,专业提供Microchip全系列开发工具及技术支持。
您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

关闭

站长推荐上一条 /1 下一条

小黑屋|公司首页|Microchip单片机,模拟器件,接口电路,麦肯单片机,单片机应用交流 ( 粤ICP备09008620号 )

GMT+8, 2024-11-24 12:10 , Processed in 0.051991 second(s), 23 queries .

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回复 返回顶部 返回列表