| 
 | 
 
   PIC18F2450/4450 Data Sheet (3/19/2008) 
 
 
Universal Serial Bus Features: 
ï USB V2.0 Compliant 
ï Low Speed (1.5 Mb/s) and Full Speed (12 Mb/s) 
ï Supports Control, Interrupt, Isochronous and  
Bulk Transfers 
ï Supports Up to 32 Endpoints (16 bidirectional) 
ï 256-Byte Dual Access RAM for USB 
ï On-Chip USB Transceiver with On-Chip Voltage  
Regulator 
ï Interface for Off-Chip USB Transceiver 
Power-Managed Modes: 
ï Run: CPU on, Peripherals on 
ï Idle: CPU off, Peripherals on 
ï Sleep: CPU off, Peripherals off 
ï Idle mode Currents Down to 5.8 μA Typical 
ï Sleep mode Currents Down to 0.1 μA Typical 
ï Timer1 Oscillator: 1.8 μA Typical, 32 kHz, 2V 
ï Watchdog Timer: 2.1 μA Typical 
ï Two-Speed Oscillator Start-up 
Flexible Oscillator Structure: 
ï Four Crystal modes, including High-Precision PLL  
for USB 
ï Two External Clock modes, up to 48 MHz 
ï Internal 31 kHz Oscillator 
ï Secondary Oscillator using Timer1 @ 32 kHz 
ï Dual Oscillator Options allow Microcontroller and  
USB module to Run at Different Clock Speeds 
ï Fail-Safe Clock Monitor: 
- Allows for safe shutdown if any clock stops 
Peripheral Highlights: 
ï High-Current Sink/Source: 25 mA/25 mA 
ï Three External Interrupts 
ï Three Timer modules (Timer0 to Timer2) 
ï Capture/Compare/PWM (CCP) module: 
- Capture is 16-bit, max. resolution 5.2 ns 
- Compare is 16-bit, max. resolution 83.3 ns 
- PWM output: PWM resolution is 1 to 10-bit 
ï Enhanced USART module: 
- LIN bus support 
ï 10-Bit, Up to 13-Channel Analog-to-Digital Converter  
module (A/D):  
- Up to 100 ksps sampling rate 
- Programmable acquisition time 
Special Microcontroller Features: 
ï C Compiler Optimized Architecture with Optional  
Extended Instruction Set 
ï Flash Memory Retention: > 40 Years 
ï Self-Programmable under Software Control 
ï Priority Levels for Interrupts 
ï 8 x 8 Single-Cycle Hardware Multiplier 
ï Extended Watchdog Timer (WDT): 
- Programmable period from 4 ms to 131s 
ï Programmable Code Protection 
ï Single-Supply In-Circuit Serial Programmingô  
(ICSPô) via Two Pins 
ï In-Circuit Debug (ICD) via Two Pins 
ï Optional Dedicated ICD/ICSP Port  
(44-pin TQFP devices only) 
ï Wide Operating Voltage Range (2.0V to 5.5V) 
 
 
推荐MICROCHIP全系列产品推广商:(可申请部分免费样片,资料,大家赶快行动吧!) 
授权A级代理商;提供技术支持;提供成熟方案;提供免费样品;提供详细资料。=============================================================== 
深圳市英锐恩科技有限公司 
联系电话:86-755-82543411,83167411,61357155 
联系传真:86-755-82543511 
Emil:enroo@enroo.com 
在线技术支持:(QQ)27781279 (QQ)908863634  
在线业务服务:(QQ)27781279 (QQ)46885145 (QQ)910737158 
总部地址:中国·深圳市福田区福华路嘉汇新城·汇商中心27楼2701 
公司网站:www.Enroo-Tech.com 或是 www.Enroo.com ; |   
 
 
 
 |